Woody's Products

Woody's Gold Digger Carbide Studs GDP6 1.575

A sharp 60° carbide tip gives you the superb trail traction and durability on hard pack snow and ice when installed with the corresponding support plate. Woody's patented Track Trapping Principle and the shoulder design prevent over tightening the...

Woody's Gold Digger Carbide Studs GDP6 1.450

A sharp 60° carbide tip gives you the superb trail traction and durability on hard pack snow and ice when installed with the corresponding support plate. Woody's patented Track Trapping Principle and the shoulder design prevent over tightening the...

Woody's Gold Digger Carbide Studs GDP6 1.325

A sharp 60° carbide tip gives you the superb trail traction and durability on hard pack snow and ice when installed with the corresponding support plate. Woody's patented Track Trapping Principle and the shoulder design prevent over tightening the...

Track Marker

A white marker used to mark the placement of your drill hole when studding your track.

Large Nut With Nylon Insert

Woody's Traction Nuts Constructed of aluminum with nylon ring Designed to increase locking force & prevent nut from coming loose Threads on stud & nut must match Tighten with torque wrench or hand ratchet: Two-ply studs = 15 ft. lbs |...

Stainless Steel 60 Degree Carbide Traction Master

All the advantage of the Gold Digger Traction Master in a stainless steel stud.  Available only in 1.00" length. 5/16" thread shank 1" Diameter, cupped head for additional support

Woody's Track Drill

Essential Tool to Install Studs Snowmobile stud installation track drill. Universal Track Drill for all stud sizes.

30 Degree Eliminator­ Traction Master Steel Studs

This stud with a Traction Master® head has a 30° point and narrow profile to penetrate the hardest ice. A perfect design for speed runs and drag competitions. Includes lock nuts. 30° steel tip digs deep for extreme control, while the...

Woody's Grand Master PRO Single Ply Studs

Performance Profiled Grand Master stud for single ply tracks.  Secure your lead with Woody's Grand Master Pro. Machine 60° carbide tip and shank For Single Ply Track Only Lengths 1.325" and 1.450" come with Big Nut Short (ALN2-4500). ...

Square GRAND Digger Aluminum Backer

Woody's Grand Digger support plates are specifically designed for use with the larger 1.200" head of Woody's Grand Master studs.  Available in 5/16" only.   These are usually sold in a set of 24 or 48 pieces, but we here at CB Performance Parts...

Dished T-Nuts

Woody's has redesigned its line of T-nuts to better accomodate the needs of the dealer and end user.  This new design uses Woody's proven Track Trapping Principle to gain extra track holding capability.  the material of this new T-nut is...

Double Grand Digger Backer Plate